Welcome to Ji'nan Bojian Testing Machine Co., Ltd.

The double column type microcomputer controlled electronic tension tester is widely used in wire and cable, textile, waterproof material, non-woven fabric, safety belt, rubber, plastic, film, wire rope, steel bar, metal wire, metal foil, metal sheet and metal rod wire and other metal materials and parts and parts. The tests of bending, tearing, stripping 90 degrees, peeling at 180 degrees, shearing, adhesion, pulling force, elongation and elongation, as well as the special mechanical properties of some products.

The double column microcomputer controlled electronic tension tester mainly tests the tensile, compression, bending, tearing, 90 degree peeling, 180 degree peeling, shearing, bonding force, pulling force, elongation and elongation of the metal and non-metallic materials and parts products, as well as the special test of some products.

1. automatic stop: after the specimen is broken, the moving beam stops automatically.

2. manual shift: automatically switch to the appropriate range according to the load size, so as to ensure the accuracy of measurement data.

3. conditional storage: test control data and sample conditions can be made into modules to facilitate batch testing.

4. automatic transmission: during the test, the speed of the mobile beam can be automatically changed according to the preset procedure, or it can also be changed manually.

5. automatic calibration: the system can automatically realize the calibration of indication accuracy.

6. automatic preservation: end of experiment, automatic storage of test data and curves;

7. process realization: test process, measurement, display and analysis are completed by microcomputer.

8. batch test: the double column microcomputer controlled electronic tensile testing machine can finish the sample with the same parameters at one time.

9. test software: Chinese WINDOWS interface, menu prompt, mouse operation;

10. display mode: data and curves are displayed dynamically with the test process.

11. curve traversal: after the test is completed, the curve can be reanalyzed, and the test data corresponding to any point on the curve can be found by using the mouse.

12. curve selection: the stress strain, force displacement, force time, displacement time curve can be displayed and printed according to the needs.

13. test report: the report can be compiled and printed according to the format required by users.

14. limit protection: double column microcomputer controlled electronic tensile testing machine has programmable control and mechanical two level limit protection.

15. overload protection: when the load exceeds the maximum 3-5% of each file, it automatically stops.

The most powerful measurement is 10KN 20KN 50KN 100KN.

Force value sensor: domestic/imported high precision force transducer.

Accuracy grade: 0.5 /1.

Test range: 1.0%~100%FS/ 0.4%~100%FS.
Force value accuracy: + + 1%/ + 0.5%.
Force value resolution: 1/200,000.
Error of displacement indication: less than 0.5% of the indicated value.
Displacement resolution: 0.05um.
Error of deformation value: less than 0.5% of the indicated value.
Test speed range: 0.1 ~ 500mm/min/0.001-200mm/min.
Transmission mode: stepper motor/servo motor drive screw drive.
Control system: domestic drives/imported drives,
Test schedule (no fixture): 700mm.
Volume (W*D*H): 600x360x1850mm (optional)
Power and power: AC 220V plus or minus 10%, 50Hz, (optional)
Weight of tensile tester: about 600KG/ (optional)
Automatic stop device machine, program control.