首页>ProductClass>Spring testing machine>Spring Torsion Testing Machine
The horizontal microcomputer controlled spring torsion test machine is mainly used for torque detection of torsion springs and elastic elements, and the tested parts are installed between the adjustable space clamps, which can adapt to the test of the torsional mechanical properties of different tested parts. The test machine uses the computer control operation, can carry on the fixed angle torque test; the display displays the angle torque curve of the tested parts; the real-time display angle, torque, curve, torque peak retention, test machine working state, test data storage, print test report and so on.
1. The Chinese test software suitable for WINDOWS platform is used to collect and process test data.
2, wizard installation and user interface, which can collect test data, calculate and process, display in real time and print results report in real time.
3, the program has real-time control, data acquisition, automatic calibration, automatic storage, drawing of measured curves, and manual effective revision of data and mathematical analysis.
4, automatically generate test reports and other functions, and can define the report content according to user needs.
5. When testing, torque, twist angle, and real-time torque angle curve are displayed in real time with the test process.
6, a batch of samples can be set at once, continuously tested, and the test settings can be stored in the computer.
7, using graphical interface based windows operating system, you can set up the display screen and control operation panel.
8. Horizontal microcomputer controlled spring torsion tester can manually or automatically reset the torque and angle measuring channels at any time as required.
1. The Chinese test software suitable for WINDOWS platform is used to collect and process test data.
2, wizard installation and user interface, which can collect test data, calculate and process, display in real time and print results report in real time.
3, the program has real-time control, data acquisition, automatic calibration, automatic storage, drawing of measured curves, and manual effective revision of data and mathematical analysis.
4, automatically generate test reports and other functions, and can define the report content according to user needs.
5. When testing, torque, twist angle, and real-time torque angle curve are displayed in real time with the test process.
6, a batch of samples can be set at once, continuously tested, and the test settings can be stored in the computer.
7, using graphical interface based windows operating system, you can set up the display screen and control operation panel.
8. Horizontal microcomputer controlled spring torsion tester can manually or automatically reset the torque and angle measuring channels at any time as required.
Index 500Nmm 5000Nmm 10Nm 50Nm 200Nm
Horizontal type
Torque measurement range 500Nmm 5000Nmm 10Nm 50Nm 200Nm
Torque minimum read value 0.01Nmm 0.1Nmm 0.01Nm 0.1Nm
The minimum reading value of the rotation angle 0.01 degrees
The relative error of indication is less than or equal to 1% (two directions of forward and reverse).
The relative error of repeatability is less than 1% (two directions of forward and reverse).
Distance between pressure plates 70200
The sample clamping method provides the mandrel according to the user spring sample.