The microcomputer controlled air spring performance test machine series is designed and manufactured in accordance with the standard of the national standard QC/T207-1996, JB/T8064.1~ 8064.2-96 and GB 25751-2010, which is designed and manufactured. The whole cycle test environment of gas spring and 4 and 8 times nominal force tensile test of the national standard can be automatically completed by microcomputer control, and a single parameter of the gas spring can be measured separately and the test results can be printed automatically. Users can adjust the test procedures according to actual needs, and the operation is very convenient. It can replace the same type of imported products, which is the first choice for gas spring manufacturers.

Technical conditions of GB/T 25751-2010 compressed air spring

QC/T207-1996 common gas spring for automobile

Technical conditions of JB/T8064.1-1996 compressed air spring

JB/T8064.2-1996 lockable gas spring technical conditions

According to a number of national standards, the whole cycle test environment of gas spring can be automatically completed by microcomputer control and the tensile performance test of 4 times and 8 times of the nominal force stipulated in the national standard, and a single parameter of the gas spring can be measured separately, and the test results can be printed automatically.

1, style: microcomputer control;

2. Maximum test force: 100KN

3, test force sub file: the whole process is divided into 1, 2, 5, 10 10 four.

4. The accuracy of the test force is: 1%;

5. Displacement resolution: 0.01mm;

6. The accuracy of displacement measurement: 0.5%;

7, stretching stroke: 600mm (customized according to customer requirements);

8, compression stroke: 600mm (customized according to customer requirements);

9, test trip: 600mm (customized according to customer requirements);

10, pressure plate diameter: 350mm (customized according to customer requirements)

11. Displacement speed control range: 0.01mm/min-300mm/min adjustable.

12. Test machine level: Level 1;

13, deformation error: less than (50+0.15L);

14. The size of the testing machine is about 760*550*1780 mm;

15, appearance: should comply with GB/T2611 requirements;

16, complete sets: meet the standard requirements;

17. Protection function: the tester has overload protection function.

18, power supply: 220V, 50Hz;

19. The weight of the host: about 500KG.