Microcomputer control compressive flexural testing machine is mainly used for concrete, steel tubes, cement products, hollow bricks, refractory materials, engineering materials, stone, rubber bearing construction materials such as compressive strength test.It is a necessary equipment for the laboratory of highway, railway, bridge, building, building materials and colleges and universities.This tester is used to conform to JB/T8763-2001 electro-hydraulic type cement pressure testing machine technology conditions, GB/T17671-1999 cement sand on the compressive strength, flexural test standard, adopt double location test space, has used a dual-use, save a space, the advantages of simple operation.
The compression-resistance folding machine adopts hydraulic loading, electronic measurement, load digital display, loading speed display, maximum load maintenance, and overload protection and power failure data retention.
JB/T8763-2001
1. The microcomputer controlled compression and folding testing machine adopts high precision sensor and digital display instrument, which can store, inspect and print test results.
2. The machine adopts spinning screw to adjust the compression space, which greatly speeds up the test progress.
3. Increase the anti-folding attachment, and can carry out the anti-folding test.
4. The machine needs no debugging, smoothly landing, refueling and receiving electricity can work.
5. The microcomputer controlled compression and bending test machine is easy to calibrate, and the user can calibrate according to the instruction manual.
6. The machine adopts high precision sensor and computer control, which can automatically store, inspect and print the test report and print the curve.
7. The compression-resistance bending test machine USES the spinning screw to adjust the compression space and greatly speeds up the test progress.
8. The machine can design the report according to the requirements of the unit.
9. This machine can realize manual and automatic dual control system.
Maximum test force 300KN (compression) /10kN (flexural)
controlled compression and bending test machine. Less than 1%
loading rate 0.3KN/S ~ 10KN/S (compression), 50N/s (flexural resistance)
Speed error of loading + 5%
Pressure plate size Phi 155mm (compression), 80X150mm (bending resistance)
Maximum piston stroke 80mm
Piston diameter Phi 130mm (compression), 60mm (bending resistance)
Maximum oil pressure 25MPa
Rated flow rate of oil pump 1.52L/min
Motor power 0.75kW
Host size mm About 820 x 450 x 1300mm
Host weight About 500Kg